Monel k500 forgings are made from the Monel alloy. It is a nickel alloy that is made from the combination of MONEL alloy 400. It has the added advantages such as hardness and strength. It has mind blowing properties and chemical reactions. Its properties are obtained by adding titanium and aluminum. It is heated in low temperature that proves very helpful to make it strong. It is made from the combination of processes such as thermal and much more. It is most widely used in fasteners and springs, pump and valve, chains and cables, marine service, doctor blades, scrapers and much more. Sagar Prakash Alloy is a company that provides you best forgings.
Monel k500 forgings will be able to crack the stress corrosion in particular conditions. It has mind-blowing features such as machinability, weldability, toughness and so on. But the features are of these forgings are also enhanced with the addition of titanium and aluminum. All these materials are heated in the restricted environment so that titanium, aluminum, and other submicroscopic particles are performing from the matrix. The most important feature of these forgings is that it is nonmagnetic. Due to this reason, it is very easy to give magnetic layer to a surface by providing low temperature.
ASTM B564 Monel K500 Open Die Hammer Forging Manufacturer, Monel K500 Forgings Supplier, Monel K500 Forgings Stockist, Monel K500 Impression Die Drop Forging, Monel Alloy K500 Cold Forging, ASME SB564 Monel Alloy K500 Press Forging, RoHS-compliant Monel K500 Upset Forging, Monel K500 Closed Die Forging, Manufacturer Of Monel Alloy K500 Hot Forging, Monel K500 Forgings, Monel Alloy K500 Forgings, K500 Compression Forging, Monel K500 Roll forging Circle Supplier.
At the time of providing layers, the copper and aluminum are select to give oxygen. After that, a thin wire and strip can easily be made. The magnetic layer can also be eradicated by bright dipping or pickling in acid. Sagar Prakash Alloy is a company that provides you best Monel k500 forgings.
Monel K500 Forgings Specification
|Standard||ASTM B564, ASME SB564|
|Specification||DIN, ASTM, BS and all International Standards|
|Flat bar blocks||up to 27" width and 15,000 lbs.|
|Cylinders and sleeves||up to 50" maximum O.D. and 65" maximum length|
|Discs and hubs||up to 50" diameter and 20,000 lbs.|
|Rolled, hand forged or mandrel forged rings||up to 84" maximum O.D. and 40" maximum length|
|Rounds, shafts and step shafts||up to 144" maximum length and 20,000 lbs.|
|Forging Types||Impression Die Forging, Open Die Forging, Seamless Rolled Forging, Hot Forging, Cold Forging, Open die hammer forging, Impression die drop forging, Closed Die Forging, Press Forging, Upset Forging, Compression Forging, Swaging, Rotary Forging, Roll forging.|
ASTM B564 Monel K500 Forgings Availability
Monel K500 Forged Bars
Monel Alloy K500 Forged Bars, Monel Alloy DIN 2.4375 Forged Bars, Monel K500 Forged Bars, AISI K500 Forged Bars, K500 Forged Bars, ASTM B564 Monel Alloy K500 Forged Bars, K500 Monel Forged Bars, Monel Alloy UNS N05500 Forged Bars, Monel Alloy NW 5500 Forged Bars.
Monel K500 Forged Circles
Monel Alloy K500 Forged Circles, ASTM B564 Monel Alloy K500 Forged Circles, Monel Alloy DIN 2.4375 Forged Circles, Monel K500 Forged Circles, Monel UNS N05500 Forged Circles, AISI K500 Forged Circles, K500 Monel Alloy Forged Circles, Monel Alloy NW 5500 Forged Circles.
Monel K500 Forged Blocks
DIN 2.4375 Forged Blocks, Monel Alloy UNS N05500 Forged Blocks, SB564 Forged Blocks, AISI K500 Forged Blocks, Monel Alloy K500 Forged Blocks, Monel K500 Forged Blocks, ASTM B564 Monel Alloy K500 Forged Blocks, K500 Monel Alloy Forged Blocks, Monel Alloy NW 5500 Forged Blocks.
Monel K500 Forged Discs
Monel Alloy K500 Forged Discs, K500 Monel Alloy Forged Discs, ASTM B564 Monel Alloy K500 Forged Discs, SB564 Forged Discs, Monel Alloy DIN 2.4375 Forged Discs, Monel UNS N05500 Forged Discs, AISI K500 Forged Discs, Monel K500 Forged Discs, Monel NW 5500 Forged Discs.
Equivalent Grades of ASME SB564 Monel K500 Forgings
|Monel K500||2.4375||N05500||NW 5500|
Monel K500 Forgings Chemical Properties
|Monel K500||0.25 max||1.5 max||0.5 max||0.010 max||27.00 – 33.00||0.5 – 2||63.00 min|
Monel Alloy K500 Forgings Mechanical Properties
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|8.44 g/cm3||1350 °C (2460 °F)||Psi – 160000 , MPa – 1100||Psi – 115000 , MPa – 790||20 %|
Monel N05500 Forgings are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.
PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
To buy Monel K500 Forgings At best price & urgent delivery please mail to [email protected], As we have Our Dealer, Supplier, distributors & direct sales representatives in all over globe who will help you to buy Monel UNS N05500 / 2.4375 Forgings & will resolve your queries
Other types of Monel K500 Forgings Ready Stock
- Monel K500 Forged Hollow Bars
- Monel K500 Forged Flat Bars
- Monel K500 Forged Blocks
- Monel UNS N05500 Forged Circles Manufacturer
- Monel DIN 2.4375 Forged Discs
- Monel UNS N05500 Forged Circular Plates
- Monel K500 Impression Die Forging
- Monel DIN 2.4375 Forged Shafts
- Monel NW 5500 Open Die Hammer Forging Manufacturer In Mumbai
- Monel DIN 2.4375 Forged Seamless Rings
- Monel K500 Open Die Forging
- Monel UNS N05500 Hot Forging
- Monel DIN 2.4375 Cold Forging
- Monel 2.4375 Forging Bar Supplier
- Monel K500 Forging Discs Exporter
- Monel K500 Compression Forging
- ASTM B564 Monel K500 Circle
- Monel UNS N05500 Press Forging
- Monel DIN 2.4375 Upset Forging
- Monel K500 Impression die drop forging
- Monel K500 Seamless Rolled Forging Manufacturer In India
- ASME SB564 Monel K500 Open die hammer forging
We Deliver ASTM B564 Monel K500 / N05500 / 2.4375 Forgings all over World
We export most of K500 Monel Forgings to countries like
Algeria, Benin, Botswana, Cameroon, Central African Republic, Comoros Congo, Cote d'Ivoire, Djibouti, Equatorial Guinea, Eritrea, Eswatini, Ethiopia, Guinea, Guinea-Bissau, Lesotho, Liberia, Madagascar, Malawi, Mauritius, Mozambique, Niger, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Somalia, South Sudan, Sudan, Tanzania, Togo, Tunisia, Uganda, Zambia, Algiers, Luanda, Porto-Novo, Gaborone, Bangui, Moroni, Brazzaville, Yamoussoukro, Malabo, Oyala, Mbabane, Addis Ababa, Banjul, Accra, Conakry, Bissau, Monrovia, Tripoli, Antananarivo, Lilongwe, Port Louis, Maputo, Niamey, Abuja, Kigali, Dakar, Victoria, Mogadishu, Pretoria, Cape Town, Khartoum, Lomé, Tunis, Czech Republic, Pakistan, Lebanon, Taiwan, Indonesia, Thailand, Chile, Oman, Bolivia, Mexico, Poland, Iraq, Singapore, France, Serbia, Libya, Denmark, Vietnam, Japan, Hong Kong, South Africa, Kuwait, Russia, Angola, Norway, Yemen, Nepal, Finland, Gabon, Macau, Tibet, Slovakia, Ghana, Belgium, Namibia, Kenya, United Arab Emirates, Portugal, Bangladesh, Romania, Venezuela, Saudi Arabia, Gambia, Brazil, Mongolia, United States, China, Chile, Afghanistan, Israel, Lithuania, Austria, New Zealand, Ecuador, Estonia, Qatar, Bhutan, Australia, Kazakhstan, Iran, Hungary, Sri Lanka, Turkey, Costa Rica, Nigeria, Zimbabwe, Greece, Azerbaijan, Ukraine, Colombia, Poland, Argentina, Italy, South Korea, Croatia, Belarus, United Kingdom, India, Algeria, Bahrain, Egypt, Malaysia, Nigeria, Germany, Jordan, Ireland, Mexico, Canada, Spain, Philippines, Iran, Trinidad & Tobago,Tunisia, Switzerland, Sweden, Netherlands, Bulgaria, Peru, Puerto Rico, Morocco.
We supply most of Monel K500 Forgings to city like
Navi Mumbai(Maharashtra), Thane(Maharashtra), Pimpri-Chinchwad(maharashtra), Thiruvananthapuram(Kerala), Coimbatore (Tamil Nadu), Chandigarh(Punjab), Ahmedabad(Gujarat), Kolkata(West Bengal), Visakhapatnam(Andhra Pradesh), Surat(Gujarat), Bhopal(india), Vadodara(Gujarat), Ernakulam(Kerala), Howrah(West Bengal), Bengaluru(Karnataka), Hyderabad(Andhra Pradesh), Secunderabad(Hyderabad), Chennai(Tamil Nadu), Haryana(india), Faridabad(Haryana), Indore(Madhya Pradesh), Gurgaon(Haryana), Mumbai (maharashtra), Pune(Maharashtra), New Delhi, Rajkot(Gujarat), Ludhiana(Punjab), Noida(Uttar Pradesh).